Draft Details

This part of IEC/IEEE 62395-1 specifies requirements for electrical resistance trace heating systems and includes general test requirements.

This document pertains to trace heating systems that can comprise either factory-fabricated or field-assembled (work-site) units, and which can be series and parallel trace heaters or surface heaters (heater pads and heater panels) that have been assembled and/or terminated in accordance with the manufacturer’s instructions.

This document also includes requirements for termination assemblies and control methods used with trace heating systems.

This document provides the essential requirements and testing appropriate to electrical resistance trace heating equipment used in industrial and commercial applications. The products complying with this document are intended to be installed by persons who are suitably trained in the techniques required and that only trained personnel carry out especially critical work, such as the installation of connections and terminations. Installations are intended to be carried out under the supervision of a qualified person who has undergone supplementary training in electric trace heating systems.

This document does not include or provide for any applications in potentially explosive atmospheres.

This document does not cover induction, impedance or skin effect heating.

Trace heating systems are grouped into different types of applications and the different conditions found during and after installation necessitate different requirements for testing. Trace heating systems are usually for a specific type of installation or application. The product type grouping, applications and product attributes are indicated in Table 1.

NOTE Trace heating systems intended for use in explosive atmospheres are the subject of IEC/IEEE-60079-30-1 and IEC/IEEE- 60079-30-2.

1DV.1 Modification of Clause 1 to replace the first sentence of the third paragraph with the following:

This document provides the essential requirements and testing appropriate to electrical resistance trace heating equipment used in industrial, commercial, and residential applications.

1DV.2 (Canada only) Modification of Clause 1 by adding the following:

This document does not apply to space heating products covered by CSA C22.2 No. XXX.

1DV.3 (United States only) Modification of Clause 1 by adding the following:

This document does not apply to space heating products covered by UL 2683.

1DV.4 (Canada only) This Standard applies to the safety of such equipment designed and constructed for installation and use in accordance with CSA C22.1, Canadian Electrical Code, Part I.

1DV.5 (United States only) This Standard applies to the safety of such equipment designed and constructed for installation and use in accordance with NFPA 70. National Electrical Code (NEC).