Draft Details
- Performance-based safety code for elevators an...
- DRAFT STANDARD
- Legal Notice for Draft Standards
- Rationale:
- Foreword
- ASME Preface
- CSA Preface
- Form and arrangement
- + PART 1 GENERAL
- + SECTION 1.1 SCOPE
- 1.1.1 Equipment Covered by this Code
- 1.1.2 Equipment Not Covered by this Code
- 1.1.3 Effective Date
- SECTION 1.2 PURPOSE
- SECTION 1.3 DEFINITIONS
- + PART 2 SAFETY REQUIREMENTS
- + SECTION 2.1 PROCESSES FOR ESTABLISHING SAFETY
- + 2.1.1 ASME A17.1/CSA B44 and ASME A17.8/CSA B44...
- 2.1.1.1
- 2.1.1.2
- + 2.1.2 ASME A17.7/CSA B44.7 Process
- 2.1.2.1
- 2.1.2.2
- 2.1.2.3
- 2.1.2.4
- 2.1.2.5
- 2.1.3 Equivalency of Processes
- + SECTION 2.2 OPTIONS FOR ESTABLISHING SAFETY
- 2.2.1
- 2.2.2
- + SECTION 2.3 SAFETY ASSESSMENT SUBJECT
- 2.3.1
- 2.3.2
- 2.3.3
- + SECTION 2.4 ASSURING SAFETY BY IMPLEMENTING GE...
- 2.4.1 Introduction
- + 2.4.2 Identification of Applicable GESRs
- 2.4.2.1 Possible Approaches
- + 2.4.2.2 Approach 1 – Preliminary Review of All ...
- 2.4.2.2.1
- 2.4.2.2.2 [embedded image]
- 2.4.2.2.3
- + 2.4.2.3 Approach 2 – Risk Scenarios
- 2.4.2.3.1
- 2.4.2.3.2
- 2.4.2.3.3
- + SECTION 2.5 SORTING OF APPLICABLE GESRS FOR AP...
- 2.5.1
- 2.5.2
- + SECTION 2.6 IMPLEMENTATION OF GESRs
- 2.6.1
- 2.6.2
- + SECTION 2.7 RISK ASSESSMENT PROCESS
- 2.7.1 Risk Assessment Methodologies
- 2.7.2 Risk Assessment Team
- 2.7.3 Risk Scenario
- + 2.7.4 Risk Estimation and Evaluation
- + 2.7.4.1 Risk Estimation
- 2.7.4.1.1
- 2.7.4.1.2
- 2.7.4.1.3
- 2.7.4.2 Risk Evaluation
- 2.7.4.3 Risk Assessment Records
- + SECTION 2.8 PROTECTIVE MEASURES AND SAFETY PRI...
- 2.8.1 Protective Measures
- 2.8.2 Verification of Safety Implications of th...
- + 2.8.3 Safety Principles
- 2.8.3.1
- 2.8.3.2
- 2.8.3.3
- 2.8.3.4
- 2.8.3.5
- + SECTION 2.9 APPLICATION OF SPS
- 2.9.1
- 2.9.2
- + SECTION 2.10 CODE COMPLIANCE DOCUMENTATION
- 2.10.1
- 2.10.2
- + SECTION 2.11 CODE DATA PLATE
- 2.11.1
- 2.11.2
- + SECTION 2.12 ADDITIONAL REQUIREMENTS
- 2.12.1
- 2.12.2
- 2.12.3
- + PART 3 GLOBAL ESSENTIAL SAFETY REQUIREMENTS (G...
- + SECTION 3.1 GLOBAL ESSENTIAL SAFETY REQUIREMEN...
- 3.1.1.1 Supports for Elevator Equipment
- 3.1.1.2 Elevator Maintenance
- 3.1.1.3 Equipment Inaccessible to Users and Non...
- 3.1.1.4 Floors of the LCU (Car) and Working Are...
- 3.1.1.5 Hazards Due to Relative Movement
- 3.1.1.6 Locking Landing Doors and Closing LCU (...
- 3.1.1.7 Evacuation
- 3.1.1.8 Sharp Edges
- 3.1.1.9 Hazards Arising from the Risk of Electr...
- 3.1.1.10 Electromagnetic Compatibility
- 3.1.1.11 Illumination of LCU (Car) and Landings...
- 3.1.1.12 Effects of Earthquake
- 3.1.1.13 Hazardous Materials
- 3.1.1.14 Environmental Influences
- SECTION 3.1.2 GESRS RELATED TO PERSONS ADJACEN...
- + SECTION 3.1.3 GESRS RELATED TO PERSONS AT THE ...
- 3.1.3.1 Access and Egress
- 3.1.3.2 Horizontal Sill-to-Sill Gap
- 3.1.3.3 Alignment of LCU (Car) and Landing
- 3.1.3.4 Self-Evacuation from an LCU (Car)
- 3.1.3.5 Gap between the Landing Doors and LCU (...
- 3.1.3.6 Means to Reopen Doors when LCU (Car) is...
- + SECTION 3.1.4 GESRS RELATED TO PERSONS IN THE ...
- 3.1.4.1 Strength and Size
- 3.1.4.2 LCU (Car) Support/Suspension
- 3.1.4.3 Overloaded LCU (Car)
- 3.1.4.4 Falling from an LCU (Car)
- 3.1.4.5 LCU (Car) Travel Path Limits
- 3.1.4.6 Uncontrolled, Unintended Movement of an...
- 3.1.4.7 LCU (Car) Collision with Objects in or ...
- 3.1.4.8 LCU (Car) Horizontal and Rotational Mot...
- 3.1.4.9 Change of Speed or Acceleration
- 3.1.4.10 Objects Falling on the LCU (Car)
- 3.1.4.11 LCU (Car) Ventilation
- 3.1.4.12 Fire/Smoke in LCU (Car)
- 3.1.4.13 LCU (Car) in Flooded Areas
- 3.1.4.14 Stopping Means Inside the LCU (Car)
- 3.1.4.15 Landing Indication
- + SECTION 3.1.5 GESRS RELATED TO PERSONS IN WORK...
- 3.1.5.1 Working Space
- 3.1.5.2 Accessible Equipment
- 3.1.5.3 Access to and Egress from Working Space...
- 3.1.5.4 Strength of Working Areas
- 3.1.5.5 Restrictions on Equipment in Elevator S...
- 3.1.5.6 Falling from Working Areas
- 3.1.5.7 LCU (Car) Movement under Control of Ele...
- 3.1.5.8 Uncontrolled, Unintended Equipment Move...
- 3.1.5.9 Means of Protection from Various Hazard...
- 3.1.5.10 Falling Objects in the Hoistway
- 3.1.5.11 Electric Shock in Working Spaces
- 3.1.5.12 Illumination of Working Spaces
- + SECTION 3.2 GLOBAL ESSENTIAL SAFETY REQUIREMEN...
- + SECTION 3.2.1 Common GESRS RELATED TO PERSONS ...
- 3.2.1.1 Strength and size
- 3.2.1.2 Falling down or off the area containing...
- 3.2.1.3 Supports for escalator equipment
- 3.2.1.4 Maintenance of escalator
- 3.2.1.5 Equipment inaccessible to users and non...
- 3.2.1.6 Surfaces of the LCU, Landing and work a...
- 3.2.1.7 Hazards due to relative movement.
- 3.2.1.8 Sharp Edges
- 3.2.1.9 Hazards arising from the risk of electr...
- 3.2.1.10 Electrical equipment
- 3.2.1.11 Electromagnetic compatibility
- 3.2.1.12 Illumination of LCU and landings
- 3.2.1.13 Effects of earthquake
- 3.2.1.14 Hazardous materials
- 3.2.1.15 Environmental Influences
- 3.2.1.16 Noise and vibration
- 3.2.1.17 Exclusive use of machinery spaces
- 3.2.1.18 Starting
- + SECTION 3.2.2 GESRS RELATED TO NON-USERS
- 3.2.2.1 Contact with moving or rotating parts
- 3.2.2.2 Failure mode
- 3.2.2.3 Environmental influence
- + SECTION 3.2.3 GESRS RELATED TO PERSONS AT THE ...
- 3.2.3.1 Falling from the landings
- 3.2.3.2 Access and egress
- 3.2.3.3 Alignment of LCU and landing
- + SECTION 3.2.4 GESRS RELATED TO USERS ON THE LC...
- 3.2.4.1 Strength and size
- 3.2.4.2 LCU support
- 3.2.4.3 Entrapment between LCU component parts
- 3.2.4.4 Entrapment between LCU and adjacent sur...
- 3.2.4.5 Uncontrolled movement of an LCU
- 3.2.4.6 LCU collision with objects in or beyond...
- 3.2.4.7 Change of speed of the LCU
- 3.2.4.8 Stopping means adjacent to the LCU
- 3.2.4.9 Succeeding LCUs
- 3.2.4.10 Stopping of the LCU
- + SECTION 3.2.5 GESRS RELATED TO PERSONS IN WORK...
- 3.2.5.1 Working space
- 3.2.5.2 Accessible equipment
- 3.2.5.3 Access to and egress from working space...
- 3.2.5.4 Strength of working areas
- 3.2.5.5 Movement of the LCU under the sole cont...
- 3.2.5.6 Protection from moving parts
- 3.2.5.7 Stopping devices in working areas
- 3.2.5.8 Means of protection from various hazard...
- 3.2.5.9 Electric shock in working spaces
- 3.2.5.10 Illumination of working spaces
- 3.2.5.11 Harmful materials and environment
- 3.2.5.12 Ergonomic principles
- 3.2.5.13 Handling and transportation
- + SECTION 3.3 GLOBAL ESSENTIAL SAFETY REQUIREMEN...
- + SECTION 3.3.1 Common GESRS RELATED TO PERSONS ...
- 3.3.1.1 Strength and size
- 3.3.1.2 Falling down or off the area containing...
- 3.3.1.3 Supports for moving walk equipment
- 3.3.1.4 Maintenance of moving walk
- 3.3.1.5 Equipment inaccessible to users and non...
- 3.3.1.6 Surfaces of the LCU, Landing and work a...
- 3.3.1.7 Hazards due to relative movement.
- 3.3.1.8 Sharp Edges
- 3.3.1.9 Hazards arising from the risk of electr...
- 3.3.1.10 Electrical equipment
- 3.3.1.11 Electromagnetic compatibility
- 3.3.1.12 Illumination of LCU and landings
- 3.3.1.13 Effects of earthquake
- 3.3.1.14 Hazardous materials
- 3.3.1.15 Environmental influences
- 3.3.1.16 Noise and vibration
- 3.3.1.17 Exclusive use of machinery spaces
- 3.3.1.18 Starting
- + SECTION 3.3.2 GESRS RELATED TO NON-USERS
- 3.3.2.1 Contact with moving or rotating parts
- 3.3.2.2 Failure mode
- 3.3.2.3 Environmental influence
- + SECTION 3.3.3 GESRS RELATED TO PERSONS AT THE ...
- 3.3.3.1 Falling from the landings
- 3.3.3.2 Access and egress
- 3.3.3.3 Alignment of LCU and landing
- + SECTION 3.3.4 GESRS RELATED TO USERS ON THE LC...
- 3.3.4.1 Strength and size
- 3.3.4.2 LCU support
- 3.3.4.3 Entrapment between LCU component parts
- 3.3.4.4 Entrapment between LCU and adjacent sur...
- 3.3.4.5 Uncontrolled movement of an LCU
- 3.3.4.6 LCU collision with objects in or beyond...
- 3.3.4.7 Change of speed of the LCU
- 3.3.4.8 Stopping means adjacent to the LCU
- 3.3.4.9 Succeeding LCUs
- 3.3.4.10 Stopping of the LCU
- + SECTION 3.3.5 GESRS RELATED TO PERSONS IN WORK...
- 3.3.5.1 Working space
- 3.3.5.2 Accessible equipment
- 3.3.5.3 Access to and egress from working space...
- 3.3.5.4 Strength of working areas
- 3.3.5.5 Movement of the LCU under the sole cont...
- 3.3.5.6 Protection from moving parts
- 3.3.5.7 Stopping devices in working areas
- 3.3.5.8 Means of protection from various hazard...
- 3.3.5.9 Electric shock in working spaces
- 3.3.5.10 Illumination of working spaces
- 3.3.5.11 Harmful materials and environment
- 3.3.5.12 Ergonomic principles
- 3.3.5.13 Handling and transportation
- + PART 4 SAFETY PARAMETERS
- + 4.1 Introduction
- 4.1.1
- 4.1.2
- + 4.2 Components, Functions, and SPs
- 4.2.1
- 4.2.2
- 4.2.3
- 4.2.4
- 4.2.5 [embedded image]
- + 4.3 General
- 4.3.1
- 4.3.2
- + PART 5 REFERENCE CODES AND STANDARDS
- SECTION 5.1 REFERENCE DOCUMENTS
- + SECTION 5.2 PROCUREMENT INFORMATION
- MANDATORY APPENDIX I CERTIFICATION OF CONFORMA...
- + I-2 Model Elevator
- + I-2.1
- I-2.2
- + I-3 Certification of Sub-Systems, Components, ...
- I-3.1
- I-3.5
- + I-4 Certification of Elevator Systems
- I-4.1
- + I-4.2
- I-4.3
- I-4.4
- + I-4.5
- I-4.5.1
- + NONMANDATORY APPENDIX A
- NONMANDATORY APPENDIX A-1
- + A-1.1 Approach
- A-1.1.1
- A-1.1.2
- A-1.1.3
- + A-1.2 Development of ISO 8100-20
- A-1.2.1
- A-1.2.2
- A-1.2.3
- Table A-1
- NONMANDATORY APPENDIX A-2
- + A-2.1 Overall Objective
- A-2.1.1
- A-2.1.2
- A-2.1.3
- A-2.1.4
- A-2.1.5
- + A-2.2 Use of GESRs
- A-2.2.1 Basis
- + A-2.2.2 Ways of Using GESRs
- A-2.2.2.1
- A-2.2.2.2
- A-2.2.2.3
- A-2.2.3 Applicability of GESRs
- + A-2.2.4 GESRs as Safety Objectives
- A-2.2.4.1
- A-2.2.4.2
- A-2.2.5 Verification of Conformance
- + A-2.3 Use of this Code
- A-2.3.1 Users
- + A-2.3.2 Designers, Manufacturers and Installer...
- A-2.3.2.1 Elevator Components and Functions
- + A-2.3.2.2 Proof of Conformance
- A-2.3.2.2.1
- A-2.3.2.2.2
- A-2.3.2.2.3
- A-2.3.3 Accredited Elevator/Escalator Certific...
- A-2.3.4 AHJs
- NONMANDATORY APPENDIX A-3
- A-3.1 General
- + A-3.2 References and Symbols in Table A-3
- A-3.2.1 Symbols in the Table Heading Identifyi...
- A-3.2.2 Symbols in the Table Columns
- Table A-3
- NONMANDATORY APPENDIX A-4
- A-4.1 General
- + A-4.2 References and Symbols in Table A-4
- A-4.2.1 Symbols in the Table Heading Identifyi...
- A-4.2.2 Symbols in the Table Columns
- Table A-4
- + NONMANDATORY APPENDIX B
- B-1
- B-2
- B-3
- B-4
- Nonmandatory Table B-1 SPs for Each GESR* (Ele...
- Nonmandatory Table B-2 SPs for Each GESR (Esca...
- Nonmandatory Table B-3 SPs for Each GESR (Movi...
- Nonmandatory Table B-4 SPs Wind Turbine Tower ...
- Nonmandatory Table B-5 Summary of Anthropometr...
- + NONMANDATORY APPENDIX C
- Table C-1
- Risk Assessment Template
- TABLES C-2.1 AND C-2.2
- + C-2.1
- Table C-2.1 Levels of Severity
- C-2.2
- Table C-2.2 Levels of Probabilities
- TABLES C-3.1 AND 3.2 RISK ESTIMATION AND EVALU...
- + NONMANDATORY APPENDIX D
- Table D-1 Examples of Hazards
- Table D-2 Examples of Hazardous Situations
- + Table D-3 Examples of Causes (Component of Har...
- Table D-4 Examples of Possible Effects
- + NONMANDATORY APPENDIX E
- + E-1 INTRODUCTION
- E-1.1
- E-1.2
- E-1.3
- + E-2 EXAMPLE: PASSENGER ELEVATOR SYSTEM WITHOUT...
- E-2.1 Determine the Reasons for, and Subject o...
- + E-2.2 Propose an Elevator System to be Deploye...
- E-2.2.1 Basic Requirements for the Proposed Sy...
- + E-2.2.2 Additional Design Requirements
- E-2.2.2.1
- E-2.2.2.2
- E-2.3 Identification of GESRs that are Applica...
- Nonmandatory Table E-2.3 List of GESRs to be V...
- + E-2.4 Risk Assessment and Risk Mitigation
- E-2.4.1 Step 4: Identification of Scenarios: H...
- E-2.4.2 Step 5: Risk Estimation
- E-2.4.3 Step 6: Risk Evaluation
- E-2.4.4 Step 7: Has the Risk been Sufficiently...
- E-2.4.5 Protective Measures
- E-2.4.6 Repeating Steps 5, 6, and 7
- E-2.5 Documentation of the Risk Assessment and...
- E-2.6 Explanation of the Development of the Pr...
- Nonmandatory Table E-2.4 Risk Assessment per N...
- Figure E-1
- Figure E-2a
- Figure E-2b
- Figure E-3 Elaboration of Design Concept LCU –...
- Figure E-4 Elaboration of the Design Concept
- + NONMANDATORY APPENDIX F ASME A17.7/CSA B44.7 P...
- Figure F-1
- + MANDATORY APPENDIX I
- I-1 General
- + I-2 Model Elevator, Model Escalator, Model Mov...
- I-2.1
- I-2.2
- I-2.3
- + I-3 Certification of Sub-Systems, Components, ...
- I-3.1
- I-3.2
- I-3.3
- I-3.4
- + I-3.5
- I-3.5.1
- I-3.5.2
- I-3.5.3
- I-3.6
- + I-4 Certification of Elevator, Escalator or Mo...
- I-4.1
- I-4.2
- I-4.3
- I-4.4
- + I-4.5
- I-4.5.1
- I-4.5.2
- I-4.5.3
- I-4.6
- I-5 AECO Records
- I-6 Marking of Sub-Systems and Components
Designation:ASME A17.7-CSA B44.7
Source:CSA
Contact:[email protected]
Contact name:Grace Lee
Review start date:Mar 15, 2024
Review end date:May 14, 2024
Categories:Construction and Engineering
Contact email:thuy.ton(at)csagroup.org
You may comment on any section of this document by clicking the “Submit Comment” link at the bottom of the relevant section.