Draft Details

Table of Contents

PVC Insulating Tape (New Edition)
DRAFT STANDARD
Legal Notice for Draft Standards
Preface
Foreword
1 Scope
+ 2 Reference Publications
2.1
3 General requirements
+ 4 Construction
+ 4.1 Material
4.1.1 General.
4.1.2 PVC Film.
4.1.3 Adhesive Coating.
4.2 Colour.
+ 4.3 Thickness
4.3.1
4.3.2
4.4 Width.
+ 5 Marking
5.1 Manufacturer's Marking.
+ 5.2 Other Marking.
5.2.1
5.2.2
5.3 Marking legibility.
+ 6 Tests
6.1 Specimens for Testing.
6.2 Specimen Conditioning
6.3 Specimen Preparation.
6.4 Average values
+ 6.5 Thickness
6.5.1
6.5.2
6.5.3
+ 6.6 Breaking Strength and Elongation
6.6.1
6.6.2
6.6.3
6.6.4
+ 6.7 Adhesion Strength
6.7.1
6.7.2
6.7.3
+ 6.8 Heat Resistance Properties
6.8.1
6.8.2
6.9 Cold Properties.
6.10 Moisture Resistance.
+ 6.11 Deformation
6.11.1
6.11.2
+ 6.12 Flammability
6.12.1
6.12.2
+ 6.13 Weather Resistance (Optional)
6.13.1
6.13.2
Table 1
Table 2
Table 3
Figure 1
Figure 2
Figure 3

PVC Insulating Tape (New Edition)

Designation:CSA C22.2 No. 197

Source:CSA

Contact:[email protected]

Contact name:Simon Khavandi

Review start date:Jun 16, 2025

Review end date:Aug 15, 2025

Categories:Electrical

Contact email:thuy.ton(at)csagroup.org

Read Draft

Alert a colleague

Draft Scope/Description:

This Standard applies to polyvinyl chloride (PVC) insulating tape for use at a maximum temperature of 60, 80, 90 or 105°C, and voltage of 600V or 1000V, for insulating joints and splices in wires and cables, in accordance with the Canadian Electrical Code, Part I.

You may comment on any section of this document by clicking the “Submit Comment” link at the bottom of the relevant section.