Draft Details
- Heating Appliances (household and commercial) ...
- DRAFT STANDARD
- Legal Notice for Draft Standards
- Preface
- CSA C22.2 No. 64:19
- + 1 Scope
- 1.1
- 1.2
- 1.3
- 1.4
- 1.5
- 1.6
- 2 Reference publications
- 3 Definitions
- 4 General requirements
- + 5 Construction
- + 5.1 General
- 5.1.1
- 5.1.2
- 5.1.3
- 5.1.4
- 5.1.5
- + 5.2 Enclosures
- + 5.2.1 General
- 5.2.1.1
- 5.2.1.2
- 5.2.1.3
- 5.2.1.4
- 5.2.2 Metallic enclosures
- + 5.2.3 Nonmetallic enclosures, supports, and dec...
- 5.2.3.1
- 5.2.3.2
- 5.2.3.3
- + 5.2.4 Openings in enclosures
- 5.2.4.1
- 5.2.4.2
- 5.2.4.3
- 5.2.4.4
- 5.2.4.5
- 5.2.4.6
- 5.2.4.7
- + 5.3 Protection against corrosion
- 5.3.1
- 5.3.2
- + 5.4 Mechanical assembly
- 5.4.1
- 5.4.2
- 5.4.3
- 5.4.4
- 5.4.5
- 5.4.6
- 5.5 Stability
- + 5.6 Supply connections
- + 5.6.1 Permanently connected appliances
- 5.6.1.1
- 5.6.1.2
- 5.6.1.3
- + 5.6.2 Terminal parts
- 5.6.2.1
- 5.6.2.2
- 5.6.2.3
- 5.6.2.4
- + 5.6.3 Cord-connected appliances — Power supply ...
- 5.6.3.1
- 5.6.3.2
- 5.6.3.3
- 5.6.3.4
- 5.6.3.5
- 5.6.3.6
- 5.6.3.7
- 5.6.3.8
- 5.6.3.9
- + 5.6.4 Strain relief
- 5.6.4.1
- 5.6.4.2
- + 5.6.5 Flexing
- 5.6.5.1
- 5.6.5.2
- + 5.6.6 Bushing
- 5.6.6.1
- 5.6.6.2
- + 5.7 Electrical insulation
- 5.7.1
- 5.7.2
- + 5.8 Thermal insulation
- 5.8.1
- 5.8.2
- + 5.9 Current-carrying parts
- 5.9.1
- 5.9.2
- 5.9.3
- + 5.10 Wiring
- 5.10.1
- 5.10.2
- 5.10.3
- 5.10.4
- 5.10.5
- 5.10.6
- 5.10.7
- 5.10.8
- 5.10.9
- + 5.11 Heating elements and heater elements
- 5.11.1
- 5.11.2
- 5.11.3
- 5.11.4
- 5.11.5
- 5.11.6
- 5.11.7
- 5.11.8
- 5.11.9
- 5.11.10
- + 5.12 Overcurrent protection
- 5.12.1
- 5.12.2
- 5.12.3
- 5.12.4
- 5.12.5
- 5.12.6
- + 5.13 Protection against overheating
- 5.13.1
- 5.13.2
- + 5.13.3
- 5.13.3.1
- 5.13.3.2
- 5.13.4
- 5.13.5
- 5.13.6
- 5.13.7
- 5.14 Receptacles
- + 5.15 Lampholders and lamps
- 5.15.1
- 5.15.2
- 5.15.3
- 5.15.4
- 5.15.5
- 5.15.6
- + 5.16 Switches and controls
- 5.16.1
- 5.16.2
- 5.16.3
- 5.16.4
- 5.16.5
- 5.16.6
- 5.16.7
- 5.16.8
- 5.16.9
- 5.16.10
- 5.16.11
- + 5.17 Motors
- 5.17.1
- 5.17.2
- + 5.18 Electromagnetic interference (EMI) filters...
- 5.18.1
- 5.18.2
- + 5.19 Spacings
- 5.19.1
- 5.19.2
- 5.19.3
- 5.19.4
- 5.20 Leakage current
- + 5.21 Bonding to ground
- 5.21.1
- 5.21.2
- 5.21.3
- 5.21.4
- 5.22 Electrical rating
- 5.23 Temperature (normal)
- 5.24 Dielectric strength
- + 6 Marking
- 6.1
- 6.2
- 6.3
- 6.4
- 6.5
- 6.6
- 6.7
- 6.8
- 6.9
- 6.10
- 6.11
- 6.12
- 6.13
- 6.14
- 6.15
- 6.16
- + 7 Tests
- + 7.1 General
- 7.1.1
- 7.1.2
- 7.1.3
- + 7.2 Rating
- 7.2.1
- 7.2.2
- 7.2.3
- 7.2.4
- 7.2.5
- + 7.3 Temperature (normal)
- + 7.3.1 General
- 7.3.1.1
- 7.3.1.2
- 7.3.1.3
- + 7.3.2 Test voltage
- 7.3.2.1
- 7.3.2.2
- + 7.3.3 Load conditions
- 7.3.3.1
- 7.3.3.2
- 7.3.3.3
- 7.3.3.4
- 7.3.3.5
- 7.3.3.6 (Deleted)
- 7.3.3.67
- 7.3.3.78
- 7.3.3.89
- + 7.3.3.910
- 7.3.3.910.1
- 7.3.3.910.2
- 7.3.3.910.3
- + 7.4 Temperature (abnormal)
- 7.4.1
- 7.4.2
- 7.4.3
- 7.4.4
- 7.4.5
- 7.4.6
- 7.4.7
- 7.4.8
- 7.4.9
- 7.4.10
- 7.4.11
- 7.4.12
- + 7.5 Dielectric strength
- 7.5.1
- 7.5.2
- 7.5.3
- + 7.6 Flexing and detachment (power supply cords ...
- + 7.6.1 Flexing
- 7.6.1.1
- 7.6.1.2
- 7.6.1.3
- 7.6.1.4
- + 7.6.2 Detachment
- 7.6.2.1
- 7.6.2.2
- 7.6.2.3
- + 7.7 Flexing (internal wiring)
- 7.7.1
- 7.7.2
- 7.7.3
- + 7.7.4
- 7.7.4.1
- 7.7.4.2
- + 7.8 Leakage current
- 7.8.1
- 7.8.2
- 7.8.3
- 7.8.4
- 7.8.5
- 7.8.6
- 7.8.7
- 7.8.8
- 7.8.9
- 7.8.10
- 7.8.11
- 7.8.12
- 7.8.13
- 7.8.14
- 7.8.15
- + 7.9 Performance of manually operated switches
- + 7.9.1 Overload
- 7.9.1.1
- 7.9.1.2
- 7.9.1.3
- 7.9.1.4
- 7.9.1.5
- 7.9.1.6
- 7.9.2 Endurance
- + 7.10 Performance of automatic temperature contr...
- 7.10.1 General
- 7.10.2 Calibration
- + 7.10.3 Overload
- 7.10.3.1
- 7.10.3.2
- + 7.10.4 Endurance
- 7.10.4.1
- 7.10.4.2
- 7.10.4.3
- + 7.11 Performance of fusible links
- 7.11.1
- 7.11.2
- 7.11.3
- 7.12 Aging of water seals
- + 7.13 Physical abuse
- 7.13.1
- 7.13.2 (Deleted)
- 7.13.23
- 7.13.34
- 7.14 Backflow
- 7.15 Stability
- 7.16 Insertion endurance
- + 7.17 Investigation of fibreglass sleeving (over...
- 7.17.1 Flame test
- + 7.17.2 Heat-resistant properties
- 7.17.2.1
- 7.17.2.2
- 7.17.2.3
- + 7.17.3 Dielectric strength after heating
- 7.17.3.1
- 7.17.3.2
- + 7.18 Thermoset material aging
- 7.18.1
- 7.18.2
- 7.18.3
- + 7.19 Insulating liner investigation
- 7.19.1 Humidity and cold-bend dielectric streng...
- 7.19.2 Thermal aging
- + 7.20 Electric toilets — Spillage
- 7.20.1
- 7.20.2
- + 7.21 Performance of appliances having PTC heate...
- + 7.21.1 General
- 7.21.1.1
- 7.21.1.2
- 7.21.1.3
- 7.21.2 Thermal cycling
- + 7.22 Thermal endurance (rope heater element)
- 7.22.1
- 7.22.2
- 7.23 Mechanical endurance (cord reels)
- 7.24 Open-coil heating element breakage
- 7.25 Strength of handles
- + 8 Cord-connected double-insulated household coo...
- + 8.1 Scope
- 8.1.1
- 8.1.2
- 8.1.3
- 8.2 Definitions
- + 8.3 General requirements
- 8.3.1
- 8.3.2
- 8.3.3
- 8.3.4
- 8.3.5
- 8.3.6
- 8.3.7
- + 8.4 Construction
- + 8.4.1 General
- 8.4.1.1
- 8.4.1.2
- 8.4.1.3
- 8.4.1.4
- 8.4.1.5
- 8.4.1.6
- + 8.4.2 Openings and recesses
- 8.4.2.1
- 8.4.2.2
- 8.4.2.3
- + 8.4.3 Mechanical assembly
- 8.4.3.1
- 8.4.3.2
- 8.4.3.3
- 8.4.3.4
- + 8.4.4 Supply connections
- 8.4.4.1
- 8.4.4.2
- 8.4.4.3
- + 8.4.5 Spacings
- 8.4.5.1
- 8.4.5.2
- 8.4.5.3
- 8.4.5.4
- 8.4.5.5
- 8.4.5.6
- 8.4.5.7
- 8.5 Marking
- + 8.6 Tests
- 8.6.1 Dielectric strength
- + 8.6.2 Leakage current
- 8.6.2.1
- 8.6.2.2
- + 8.6.3 Abnormal operation
- 8.6.3.1
- 8.6.3.2
- + 9 Requirements for bare element water heaters (...
- + 9.1 Scope
- 9.1.1
- 9.1.2
- 9.1.3
- 9.1.4
- 9.2 Definitions
- 9.3 General requirements
- + 9.4 Construction
- 9.4.1
- 9.4.2
- 9.4.3
- 9.4.4
- 9.4.5
- 9.4.6
- 9.4.7
- 9.4.8
- 9.4.9
- 9.4.10
- + 9.5 Markings
- 9.5.1
- 9.5.2
- 9.5.3
- 9.5.4
- 9.5.5
- + 9.5.6
- 9.5.6.1
- 9.5.6.2
- + 9.6 Tests
- + 9.6.1 Escape current test
- 9.6.1.1
- 9.6.1.2
- 9.6.1.3
- 9.6.1.4
- + 9.6.2 Abnormal operation
- 9.6.2.1
- 9.6.2.2
- + 9.6.3 Hydrostatic strength test
- 9.6.3.1
- 9.6.3.2
- Table 1
- Table 2
- Table 3
- Table 4
- Table 5
- Table 6
- Table 7
- Table 8
- Table 9
- Figure 1
- Figure 2
- Figure 3
- Figure 4 (Deleted)
Designation:C22.2 No. 64
Source:CSA
Contact:[email protected]
Contact name:Uliana Flynn
Review start date:Feb 7, 2025
Review end date:Apr 8, 2025
Categories:Electrical
Contact email:angelique.coyle(at)csagroup.org
Draft Scope/Description:
1.1
This Standard applies to cord-connected and permanently connected cooking and liquid-heating appliances* rated for use on nominal single-phase system voltages of 240 V and less and designed to be used in nonhazardous locations in household and similar applications in accordance with CSA C22.1, Canadian Electrical Code, Part I.
*The abbreviated term “appliance” is used in this Standard.
This Standard also applies to appliances used in commercial applications, including appliances used in shops, in light industry and on farms.
1.2
This Standard applies to kitchen-type cooking and liquid-heating appliances such as
a) deep-fat fryers;
b) frypans; and
c) similar appliances.
1.3
This Standard applies to miscellaneous equipment such as
a) barbecue lighters;
b) incineration and humus (or chemical) types of electric toilets;
c) vaporizers;
d) garment steamers; and
e) similar equipment.
1.4
This Standard does not apply to appliances covered by a specific Standard under the Canadian Electrical Code, Part II such as:
a) electric portable cooking appliances such bread makers, candy floss maker, hot plates, indoor barbecues, popcorn makers, portable ovens, toasters, and waffle irons covered by CAN/CSA-C22.2 No. 60335-2-9;
b) outdoor barbecues covered by CAN/CSA-C22.2 No. 60335-2-78;
c) electric warming plates, warming trays and similar appliances covered by CSA C22.2 No. 60335-2-12;
d) electric liquid heating appliances such as bottle warmers, coffee makers, egg boilers, kettles, pressure cookers, rice cookers, water distillers, slow cookers, poultry water heaters, and stock water heaters covered by CAN/CSA-C22.2 No. 60335-2-15;
e) facial saunas and hair dressing equipment covered by CAN/CSA-C22.2 No. 60335-2-23;
f) electric instantaneous water heaters covered by CSA C22.2 No. 60335-2-35;
g) electrical appliances for use in aquariums or garden ponds covered by CAN/CSA-C22.2 No. 60335-2-55;
h) household electric ranges covered by CSA C22.2 No. 61;
i) commercial cooking appliances covered by CSA C22.2 No. 109, CSA C22.2 No. 60335-2-36, CSA C22.2 No. 60335-2-37, CSA C22.2 No. 60335-2-38, CSA C22.2 No. 60335-2-39, CSA C22.2 No. 60335-2-42, CSA C22.2 No. 60335-2-47, CSA C22.2 No. 60335-2-48 and CSA C22.2 No. 60335-2-49;
j) storage tank type water heaters covered by CAN/CSA-C22.2 No. 110;
k) industrial liquid heaters covered by CSA C22.2 No. 88; and
l) insecticide vaporizers.
1.5
In this Standard, “shall” is used to express a requirement, i.e., a provision that the user is obliged to satisfy in order to comply with the standard; “should” is used to express a recommendation or that which is advised but not required; and “may” is used to express an option or that which is permissible within the limits of the standard.
Notes accompanying clauses do not include requirements or alternative requirements; the purpose of a note accompanying a clause is to separate from the text explanatory or informative material.
Notes to tables and figures are considered part of the table or figure and may be written as requirements.
Annexes are designated normative (mandatory) or informative (non-mandatory) to define their application.
1.6
The values given in SI units are the units of record for the purposes of this Standard. The values given in parentheses are for information and comparison only.
You may comment on any section of this document by clicking the “Submit Comment” link at the bottom of the relevant section.