Draft Details
- MC iec62841-3-4-amd2-ed1-0-b (PDF document, 649 KB)
- MC CAN-CSA-C22.2 NO. 62841-3-4_16 (R2021) (PDF document, 2 MB)
For PDF files, Adobe Acrobat Reader can be downloaded from the Adobe website.
Scope: CAN/CSA-C22.2 NO. 62841-3-4:16 (R2021)
This clause of Part 1 is applicable except as follows:
Addition:
This part of IEC 62841 applies to transportable bench grinders that can be equipped with one or two accessories as follows:
– type 1 grinding wheels in accordance with ISO 603-4:1999 with a diameter not exceeding 310 mm and a thickness not exceeding 55 mm;
– wire brushes with a diameter not exceeding 310 mm and a thickness not exceeding 55 mm;
– polishing wheels with a diameter not exceeding 310 mm;
and with a peripheral speed of any accessory between 10 m/s and 50 m/s.
NOTE Polishing wheels are also known as buffing wheels.
You may comment on any section of this document by clicking the “Submit Comment” link at the bottom of the relevant section.