Draft Details
- IEC 61347-2-3 Ed. 2.1 (PDF document, 2 MB)
For PDF files, Adobe Acrobat Reader can be downloaded from the Adobe website.
[Replace the first two paragraphs with the following]
This part of CSA E61347 specifies particular safety requirements for electronic controlgear designed to be installed on branch circuits not exceeding 600V nominal between conductors, in accordance with the rules of the Canadian Electrical Code, Part I, with lamp operating frequencies deviating from the supply frequency, associated with fluorescent lamps as specified in IEC 60081 and IEC 60901 or ANSI C78.81 and ANSI C78.901 and other fluorescent lamps for high-frequency operation.
Performance requirements are the subject of IEC 60929 and ANSI C82.11.
[Replace the first paragraph with the following]
This part of the CAN/CSA-E61347 series specifies particular safety requirements for electronic ballasts that are
a) designed to be installed on branch circuits not exceeding 600 V nominal between conductors and used in accordance with the rules of the Canadian Electrical Code, Part I, with operating frequencies deviating from the supply frequency; and
b) associated with fluorescent lamps as specified in IEC 60081 and IEC 60901 or ANSI C78.81 and
ANSI C78.901 and other fluorescent lamps for high-frequency operation.
[Replace the last paragraph with the following]
Performance requirements are the subject of IEC 60929 and ANSI C82.11.
You may comment on any section of this document by clicking the “Submit Comment” link at the bottom of the relevant section.