Draft Details

Designation:C22.2 NO. 60335-2-34
Source:CSA
Review start date:Feb 28, 2023
Review end date:Apr 29, 2023
Categories:Electrical
Contact email:mary.morgan(at)csagroup.org
Associated materials (click link to download). You will need to be logged in to download any files:

Adobe Acrobat For PDF files, Adobe Acrobat Reader can be downloaded from the Adobe website.

Draft Scope/Description:

This clause of Part 1 is replaced by the following.

This part of IEC 60335 deals with the safety of sealed (hermetic and semi-hermetic type) motor-compressors, their protection and control systems, if any, which are intended for use in equipment for household and similar purposes and which conform with the standards applicable to such equipment. It applies to motor-compressors tested separately, under the most severe conditions that may be expected to occur in normal use, their rated voltage being not more than 250 V for single-phase motor-compressors and 600 V for other motor-compressors.

This standard also covers

–     multi-speed motor-compressors, that are motor-compressors, the speed of which can be set to different values;

–     variable capacity motor-compressors that are motor-compressors where the capacity of the compressor is controlled at fixed speeds.

NOTE 101 Examples of equipment which contain motor-compressors are

–     tumble dryers (IEC 60335-2-11);
–     refrigerating appliances, ice-cream appliances and ice-makers (IEC 60335-2-24);
–     electrical heat pumps, air-conditioners and dehumidifiers (IEC 60335-2-40);
–     commercial dispensing appliances and vending machines (IEC 60335-2-75);
–     commercial refrigerating appliances and ice-makers with an incorporated or remote refrigerant unit or compressor (IEC 60335-2-89);
–     electrical equipment for measurement, control, and laboratory use (IEC 61010-2-011);
–     professional ice-cream makers (IEC 60335-2-118);
–     refrigerating systems and heat pumps (ISO 5149-2).

This standard does not supersede the requirements of standards relevant to the particular appliance in which the motor-compressor is used. However, if the motor-compressor type used complies with this standard, the tests for the motor-compressor specified in the particular appliance standard may not need to be made in the particular appliance or assembly. If the motor-compressor control system is associated with the particular appliance control system, additional tests could be necessary on the final appliance.

So far as is practical, this standard deals with the common hazards presented by motor-compressors used in appliances which are encountered by all persons in and around the home. However, it does not in general take into account

–     the use of appliances by young children or infirm persons without supervision;
–     playing with the appliances by young children.

NOTE 102 Attention is drawn to the fact that

–     for motor-compressors intended to be used in appliances in vehicles or on board ships, additional require­ments could be necessary;
–     in many countries, additional requirements are specified by the national health authorities, the national authorities responsible for the protection of labour and similar authorities.

This standard does not apply to

–     motor-compressors designed exclusively for industrial purposes;
–     motor-compressors used in appliances intended to be used in locations where special conditions prevail, such as the presence of a corrosive or explosive atmosphere (dust, vapour or gas).

NOTE 103 If motor-compressors for refrigerant R-744 used in appliances with a transcritical refrigeration system are equipped with pressure relief devices, compliance with the requirements for these devices is checked during the tests on the final appliance.

1DV.1 DR Replace Clause 1 of the Part 2 with the following;

This International Standard deals with the safety of sealed (hermetic and semi-hermetic type) MOTOR-COMPRESSORS, their protection and control systems, if any, which are intended for use in equipment for household and similar purposes, appliance use but which never the less not intended for normal household can be source of danger to the public, such as appliances intended to be used by laymen in shops, in light industry, and farms, are within the scope of this standard, and which conform with the standards applicable to such equipment. It applies to MOTOR-COMPRESSORS tested separately, under the most severe conditions that may be expected to occur in normal use, their rated voltage being not more than 250 V for single-phase, MOTOR-COMPRESSORS, 600 V multi-phase, 600 V direct current (DC), and battery-operated. for other Annex 101.0DVI applies to MOTOR-COMPRESSORS rated greater than 600 V.  MOTOR-COMPRESSORS covered by this standard are intended for use in accordance with: intended for use in accordance with:

-  CSA C22.1, Canadian Electrical Code (CE Code) Part I, in Canada;
-  NFPA 70, National Electrical Code (NEC), in the United States.

For MOTOR-COMPRESSORS rated greater than 600 V, see the requirements of Annex 101.DVI.

This standard also covers

- multi-speed MOTOR-COMPRESSORS, that are MOTOR-
COMPRESSORS
, the speed of which can be set to different values;
- variable capacity MOTOR-COMPRESSORS, that are MOTOR-COMPRESSORS where the capacity of the compressor is controlled at fixed speeds;.
- motor-compressors used in an appliance not intended for normal household use but which nevertheless may be a source of danger to the public, These appliances are intended to be used by laymen in shops, in light industry, farms, and similar applications.

appliances not intended for normal household use but which nevertheless may be a source of danger to the public, such as appliances intended to be used by laymen in shops, in light industry and on farms.

NOTE 101 Examples of equipment which contain MOTOR-COMPRESSORS are

- tumble dryers (IEC 60335-2-11);
- refrigerating appliances, ice-cream appliances and ice-makers (IEC 60335-2-24);
- electrical heat pumps, air-conditioners and dehumidifiers (IEC 60335-2-40);
- commercial dispensing appliances and vending machines (IEC 60335-2-75);
- commercial refrigerating appliances and ice makers with an incorporated or remote refrigerant unit or compressor (IEC 60335-2-89).
- electrical equipment for measurement, control, and laboratory use (IEC 61010-2-011);
- professional ice-cream makers (IEC 60335-2-118);
- refrigerating systems and heat pumps (ISO 5149-2)
- Stirling Engines

This standard does not supersede the requirements of standards relevant to the particular appliance in which the motor-compressor is used. However, if the motor-compressor type used complies with this standard, the tests for the motor-compressor specified in the particular appliance standard may not need to be made in the particular appliance or assembly. If the motor-compressor control system is associated with the particular appliance control system, additional tests could be necessary on the final appliance.

So far as is practical, this standard deals with the common hazards presented by motor-compressors used in appliances which are encountered by all persons in and around the home. However, it does not in general take into account

–     the use of appliances by young children or infirm persons without supervision;
–     playing with the appliances by young children.

NOTE 102 Attention is drawn to the fact that

–     for motor-compressors intended to be used in appliances in vehicles or on board ships, additional require­ments could be necessary;
–     in many countries, additional requirements are specified by the national health authorities, the national authorities responsible for the protection of labour and similar authorities.

This standard does not apply to

–     motor-compressors used in appliances intended to be used in locations where special conditions prevail, such as the presence of a corrosive or explosive atmosphere (dust, vapour or gas).

NOTE 103 If motor-compressors for refrigerant R-744 used in appliances with a transcritical refrigeration system are equipped with pressure relief devices, compliance with the requirements for these devices is checked during the tests on the final appliance.

You may comment on any section of this document by clicking the “Submit Comment” link at the bottom of the relevant section.