Draft Details
- PR CSA C22.2 No. 62841-3-10 AMT (PDF document, 52 KB)
- IEC 62841-3-10 AMT (PDF document, 596 KB)
- CSA C22.2 No. 62841-3-10 (R2021) (PDF document, 1 MB)
For PDF files, Adobe Acrobat Reader can be downloaded from the Adobe website.
This clause of Part 1 is applicable, except as follows:
Addition:
This part of IEC 62841 applies to transportable cut-off machines intended to cut materials such as
metals, concrete and masonry and to be fitted with one abrasive
– bonded reinforced wheel of Type 41, or
– diamond cut-off wheel with the peripheral gaps, if any, not exceeding 10 mm
and with
– a rated no-load speed not exceeding a peripheral speed of the wheel of 100 m/s with the maximum wheel diameter and
– a wheel diameter range of 250 mm to 410 mm.
This standard does not apply to:
– transportable mitre saws;
– transportable tile saws;
– transportable metal saws.
NOTE 101 Transportable mitre saws are covered by IEC 62841-3-9. Transportable tile saws will be covered by a
future part of IEC 62841-3. Transportable metal saws will be covered by a future part of IEC 62841-3.
You may comment on any section of this document by clicking the “Submit Comment” link at the bottom of the relevant section.