Draft Details

Designation:C22.2 NO. 346
Source:CSA
Contact name:Iris Monner
Review start date:Mar 26, 2021
Review end date:May 25, 2021
Categories:Energy
Contact email:kelly.yaremko(at)csagroup.org
Associated materials (click link to download). You will need to be logged in to download any files:

Adobe Acrobat For PDF files, Adobe Acrobat Reader can be downloaded from the Adobe website.

Draft Scope/Description:

1.1
These requirements cover DC conductive charging equipment intended to be supplied with a maximum input voltage of 1000 volts ac or 1500 V dc, for recharging the propulsion batteries in over-the-road electric vehicles (EV). DC Charging Equipment for Electric Vehicles installations are intended for dry location only, or wet and damp location. Equipment is intended to be installed in accordance with the Installation Codes in Annex A, Ref. No.1.
1.1.1 The output of the DC charging equipment for EV shall not exceed 1500 V dc.

1.2
For the purposes of this Standard, the term "electric vehicle", designated throughout by the initials "EV", is considered to cover electric vehicles, hybrid electric vehicles, and plug-in versions of these vehicles.

1.3
DC charging equipment for EV that is not a complete assembly and depends upon installation in an end product for compliance with the requirements in this Standard is investigated under the requirements of this Standard and the standard for the end product.

1.4
These requirements do not cover battery chargers covered by Annex A, Ref. Nos. 2 and 3.

1.5
These requirements do not cover on-board chargers.

1.6
These requirements do not cover electric vehicle supply equipment covered by Annex A, Ref. No. 3A.

1.7
These requirements do not cover DC charging equipment for electric vehicles intended to be used in hazardous locations; or near fuel dispensing stations.

You may comment on any section of this document by clicking the “Submit Comment” link at the bottom of the relevant section.