Draft Details

Designation:C22.2 No. 62841-3-7
Review start date:Jul 29, 2020
Review end date:Sep 27, 2020
Contact email:mary.morgan(at)csagroup.org
Associated materials (click link to download). You will need to be logged in to download any files:

Adobe Acrobat For PDF files, Adobe Acrobat Reader can be downloaded from the Adobe website.

Draft Scope/Description:


This clause of Part 1 is applicable, except as follows:

Replacement of the third paragraph:

The rated voltage is not more than 250 V for single-phase a.c. or d.c. tools, and 480 V for three-phase a.c. tools.


This document applies to transportable wall saws guided by a track guiding system intended for dry cutting or to be connected to a liquid system for cutting concrete, stone or similar material by means of a diamond wheel. The rated speed of the diamond wheel does not exceed a peripheral speed of 100 m/s at rated capacity.

This document does not apply to transportable wall saws that are intended to be left unattended while performing an operation.

This document does not apply to transportable wall saws that employ hydraulic systems. This document does not apply to hand-held cut-off machines.

NOTE 101   Hand-held cut-off machines will be covered by a future part of IEC 62841-2.

You may comment on any section of this document by clicking the “Submit Comment” link at the bottom of the relevant section.