Draft Details

Designation:ANSI LC 1 CSA 6.26
Review start date:Mar 26, 2019
Review end date:May 27, 2019
Categories:Energy
Contact email:tarsem.suri(at)csagroup.org
Draft Scope/Description:

1 Scope

1.1

This Standard applies to fuel gas piping systems using corrugated stainless steel tubing (CSST), intended for installation in residential, commercial or industrial buildings, and including the following components as a minimum:

a)Corrugated stainless steel tubing (CSST);

b)Fittings for connection to the CSST; and

c)Striker plates (see Clause 3, Definitions) to protect the installed CSST from puncture threats.

Other components of piping systems covered by this Standard include gas manifolds, gas pressure regulators, manual gas valves, quick-disconnect devices and gas convenience outlets (see Clauses 4.3, Gas pressure regulators, 4.4, Manually operated gas valves and 4.5, Quick-disconnect devices and gas convenience outlets). If such additional components are required to complete the piping system installation, they are either provided as part of the piping system or specified in the manufacturer’s installation instructions [see Clause 4.7-m)].

You may comment on any section of this document by clicking the “Submit Comment” link at the bottom of the relevant section.