Draft Details
1 Scope
This European Standard applies to cast aluminium alloy enclosures pressurized with dry air, inert gases, for example sulphur hexafluoride or nitrogen or a mixture of such gases, used in indoor or outdoor installations of high-voltage switchgear and controlgear above 1 kV, where the gas is used principally for its dielectric and/or arc-quenching properties with rated voltages
Above 1kV and up to and including 52 kV and with gas-filled enclosures with design pressure higher than 300 kPa relative pressure (gauge);
And with rated voltage above 52 kV.
The enclosures comprise parts of electrical equipment not necessarily limited to the following examples:
Circuit-breakers
Switch-disconnectors
Disconnectors
Earthing switches
Current transformers
Voltage transformers
Surge arrestors
Busbars and connections
Etc.
The scope also covers pressurized components such as the centre chamber of live tank switchgear, gas-insulated current transformers, etc.
You may comment on any section of this document by clicking the “Submit Comment” link at the bottom of the relevant section.