Draft Details

Designation:C22.2 NO. 62841-3-13
Source:CSA
Contact:leonard.letea@csagroup.org
Review start date:Jun 21, 2017
Review end date:Aug 20, 2017
Categories:Electrical
Contact email:mary.morgan(at)csagroup.org
Draft Scope/Description:

1 Scope
This clause of Part 1 is applicable, except as follows:
Addition:
This part of IEC 62841 applies to transportable drills, with manually fed axial movement of the spindle,
having a maximum chuck capacity of 13 mm.
NOTE 101 Transportable drills are also known as bench drills or drill presses.
This part of IEC 62841 does not apply to stationary drilling machines.
This part of IEC 62841 does not apply to radial arm drills.
This part of IEC 62841 does not apply to magnetic drill stands and drill motors.
NOTE 102 Magnetic drill stands and drill motors will be covered by a future part of IEC 62841-3.
NOTE 103 In Europe (EN 62841-3-13), the following conditions apply:
Radial arm drills and stationary drilling machines are covered by EN 12717.
 

You may comment on any section of this document by clicking the “Submit Comment” link at the bottom of the relevant section.